Yes. The Hoyt RX-9 carries the Integrate rest dovetail, so a QAD Integrate MX2 clamps straight on. The correct version and the Berger fallback.
Updated 05 September 2026.
Does the QAD Integrate MX2 fit a Hoyt RX-9?
Direct fit. The Hoyt RX-9 carries the Integrate rest dovetail, so the QAD Integrate MX2 clamps on with no adapter and self-levels as the claws tighten.
Bow rest mount
Integrate Mounting System dovetail, plus the 5/16"-24 Berger hole
Rest version
QAD Integrate MX2 (standard version fits Mathews, Hoyt, Bear, Prime, Elite Integrate risers)
The RX-9 carries the Integrate dovetail, so the MX2 clamps on with no adapter.
The two ends
| Bow rest mount | Integrate Mounting System dovetail, plus the 5/16"-24 Berger hole |
|---|---|
| Rest version | QAD Integrate MX2 (standard version fits Mathews, Hoyt, Bear, Prime, Elite Integrate risers) |
| Adapter needed | none for the Integrate dovetail |
| Berger fallback | the Berger hole still takes a conventional bolt-on rest |
The Hoyt RX-9 is machined with the Integrate rest dovetail, so the rest clamps directly to the riser with two self-leveling claws and no bolt to fight.
The Integrate MX2 is up to 60 percent lighter than a Berger-mount rest because it loses the mounting arm. If you prefer a conventional rest, the Berger hole is still on the riser.
What to buy
Shop QAD Integrate MX2 (standard version fits Mathews, Hoyt, Bear, Prime, Elite Integrate risers) on AmazonaffiliateFind QAD Integrate MX2 (standard version fits Mathews, Hoyt, Bear, Prime, Elite Integrate risers) on eBayaffiliateRelated
Questions and answers
Does the QAD Integrate MX2 fit a Hoyt RX-9?
Direct fit. The Hoyt RX-9 carries the Integrate rest dovetail, so the QAD Integrate MX2 clamps on with no adapter and self-levels as the claws tighten.