Does the QAD Integrate MX2 fit a Berger-hole bow?
Not a direct fit. The MX2 clamps to an Integrate dovetail, so a bow with only a Berger hole needs the QAD Integrate Berger Mount Adapter to give it a dovetail to clamp to.
Rest mount
Integrate Mounting System dovetail clamp
Bow has
5/16"-24 Berger hole only, no dovetail
An Integrate rest on a Berger-only riser needs the QAD Integrate Berger Mount Adapter.
The two ends
| Rest mount | Integrate Mounting System dovetail clamp |
|---|---|
| Bow has | 5/16"-24 Berger hole only, no dovetail |
| Adapter | QAD Integrate Berger Mount Adapter |
| Narrow adapter fits | risers 0.500 to 0.675 inch thick |
| Wide adapter fits | risers 0.675 to 0.800 inch thick |
The MX2 has no bolt hole; it grips a dovetail. On a bow that predates the Integrate system there is no dovetail, only the Berger hole, so you fit the QAD Integrate Berger Mount Adapter. It bolts to the Berger hole and presents the dovetail the rest then clamps to.
Measure your riser thickness before ordering. The adapter comes in a narrow version for 0.500 to 0.675 inch risers and a wide version for 0.675 to 0.800 inch risers, and the wrong one either will not seat or will not clamp square.
Related
Sources: QAD Integrate Berger Mount Adapter ยท QAD UltraRest Integrate MX2